公司主要经营:单机除尘器,水力除尘器,单机除尘器厂家,滤筒脉冲除尘器,水力除尘器。 服务热线:0571-88663864 / 0571-88662170 / 0571-88671230

新闻资讯

  • 单机除尘器运行前需要做?
  • 本站编辑:杭州恩普森环保设备有限公司发布日期:2022-03-17 14:32 浏览次数:

在单机除尘器运行前需做好相应的检查和调试。在正式运转前,应对单机除尘器做一个全部的检查,确认各部件的运行正常。

在日常的运转中,除了要对单机除尘器做一些常规的检查外,还要特别注意几个容易出故障或损害的地方。

观察风机的运转方向、转速、振动频率和温度变化;

对滤袋进行安装时,注意检查是否有掉袋、松口、磨损等情况发生。若是滤袋出现破损,看其是否有漏灰或导致滤袋不通畅,则应停机立即更换;

在整个清灰过程中,应密切观察清灰周期及时间变化,这是决定单机除尘器是否能正常运转的需要条件。若是清灰时间过长,需将设备上附着的灰尘清掉,使滤袋能正常的使用,而且还能效果优良避免滤袋过早的破损。

若是想要提高清灰效果,则需对单机除尘器的运转速率、工作时间等做相应调整,但这样的话会适当增加经济压力。可通过不同的清灰方法,确定合适的清灰周期和时间,确认除尘器能达到较佳的运转效果。

Corresponding inspection and commissioning shall be carried out before the operation of single dust collector. Before the formal operation, a complete inspection shall be conducted for the single dust collector to confirm that all parts operate normally.

In daily operation, in addition to routine inspection of single dust collector, special attention should be paid to several places prone to failure or damage.

Observe the running direction, speed, vibration frequency and temperature change of the fan;

When installing the filter bag, pay attention to check whether there is bag falling, loose mouth, wear and other conditions. If the filter bag is damaged, check whether there is ash leakage or the filter bag is blocked, stop the machine and replace it immediately;

In the whole ash cleaning process, the ash cleaning cycle and time change shall be closely observed, which is the required condition to determine whether the single dust collector can operate normally. If the dust removal time is too long, the dust attached to the equipment needs to be removed, so that the filter bag can be used normally, and the effect can be excellent to avoid premature damage of the filter bag.

If you want to adjust the dust removal speed of the single machine, you need to increase the dust removal effect accordingly, but if you want to do so, the operation time of the single machine will be increased accordingly. Through different ash cleaning methods, determine the appropriate ash cleaning cycle and time, and confirm that the dust collector can achieve better operation effect.