公司主要经营:单机除尘器,水力除尘器,单机除尘器厂家,滤筒脉冲除尘器,水力除尘器。 服务热线:0571-88663864 / 0571-88662170 / 0571-88671230

新闻资讯

  • 滤筒脉冲除尘器的特点
  • 本站编辑:杭州恩普森环保设备有限公司发布日期:2022-04-26 16:43 浏览次数:

滤筒采用进口聚酯纤维作为滤料,把一层亚微米级的超薄纤维粘附在一般滤料上,并且在该粘附层上纤维间的排列非常紧密,极小的筛孔可把大部分亚微米级的尘粒阻挡在滤料表面;过滤精度和效率更好;

滤料折褶使用,可增大过滤面积,并使除尘器结构更为紧凑;

滤筒高度小,安装维修工作量小;

与同体积除尘器相比,过滤面积相对较大,过滤风速较小,阻力不大;

单机除尘器清灰采用脉冲喷吹在线清灰方式。清灰过程由脉冲控制仪自动控制。除尘器内设置多个滤筒以增加其有效过滤面积,当对滤筒满足清灰设定要求时,即启动喷吹装置进行清灰,其他滤筒正常工作,这样既达到了清灰效果又不影响设备运行,使除尘器可连续运转;组合式除尘器清灰采用分室离线脉冲自动循环清灰。

 除尘效率高(一般可达99.6%以上),操作方便;滤筒按统一标准制造,采用高速连接,使滤筒拆装十分方便,减轻了工人体力劳动强度,改善了劳动条件。

The filter cartridge adopts imported polyester fiber as the filter material, adheres a layer of submicron ultra-thin fiber to the general filter material, and the arrangement of fibers on the adhesive layer is very close, and the small screen hole can block most submicron dust particles on the surface of the filter material; Better filtering accuracy and efficiency;

The use of filter material folding can increase the filtering area and make the structure of dust collector more compact;

The height of the filter cartridge is small, and the installation and maintenance workload is small;

Compared with the dust remover with the same volume, the filtering area is relatively large, the filtering wind speed is small, and the resistance is small;

Pulse injection on-line ash cleaning method is adopted for single dust collector. The ash cleaning process is automatically controlled by the pulse controller. Multiple filter cartridges are set in the dust remover to increase its effective filtering area. When the filter cartridge meets the ash cleaning setting requirements, the injection device is started for ash cleaning, and other filter cartridges work normally. In this way, the ash cleaning effect is achieved without affecting the equipment operation, so that the dust remover can operate continuously; The combined dust collector adopts off-line pulse automatic circulating dust cleaning in separate rooms.

High dust removal efficiency (generally more than 99.6%) and convenient operation; The filter cartridge is manufactured according to the unified standard and connected at high speed, which makes the disassembly and assembly of the filter cartridge very convenient, reduces the physical labor intensity of workers and improves the working conditions.